You
can
use
ISEE
Charge
anywhere
and
share
with
friends,
while
Harmonizing
up
to
five
devices
simultaneously…
Very
few
people
on
this
planet
go
through
their
day
without
using
a
device,
be
that
a
phone,
a
laptop
or
another
battery
operated
technology.
Such
devices are now such a prolific part of peoples lives that most might consider a day without using them difficult.
We believe it is important to be able to use such technologies in a harmonized state.
The
ISEE
Charge
was
designed
and
developed
to
do
just
that,
in
a
way
that
allows
you
to
use
such
technologies
without
having
to
attach
or
apply
anything
directly
to,
or
on,
your
devices.
This
method,
while
also
allowing
huge
versatility
and
multiple
device
charging,
additionally
prevents
loss
of
function, such as accidentally dropping the device, which may result in an external solution’s permanent damage.
This ISEE Charge applies this function to a wide array of devices that are battery operated, including, but not limited to:
A
unique
advancement
for
your
device
harmonization,
without
the
need
to
apply
an
external
attachment
to
each,
or
any
of
your devices.
This
novel
approach
applies
the
ISEE
harmonisation
function,
through
the
flow
of
electrical
current,
to
the
device
battery
directly,
while it is recharging.
This
is
achieved
simply
by
placing
the
ISEE
Charge
next
to
the
recharging
cable,
so
that
the
edge
of
the
ISEE
charge
is
no
more
than
5
cm
(approximately
2
in)
away
from
the
cable
itself.
The
device
being
charged
should
be
in
flight
mode
,
such
as
while
overnight charging and not in use.
Advanced harmonization by creating the ISEE effect in the field of your
devices battery
This
novel
and
advanced
technique
stores
the
ISEE
effect
directly
into
the
field
of
the
devices
battery
by
conditioning the flow of current used to charge it.
Not
only
does
this
negate
the
need
to
have
multiple
harmonization
devices
on
each
device
you
have,
but
allows
for
your
device
to
be
used
conveniently
without
an
external
appendage.
This
method
also
means
that
the
longevity
of
harmonization
is
maintained,
due
to
the
daily
use
of
a
phone
with
the
multitude
of
physical
impacts
and
it
can
endure.
It
is
important
to
know
that
harmonization
is
current
and
effective
and
not
dimished
by
repreated
physical
collisions,
however
mild,
which
is
a
common
ailment,
we
believe,
to
harmonization methods were an external device is placed directly on the device itself.
Simply
make
sure
that
your
device
is
charged
to
between
20%
to
100%
charge
state,
to
allow
for
optimum
ISEE
Charge
effects.
Once
your
device
falls
below
20%,
just
recharge
using
the
ISEE
Charge
and
you
are
ready to use your device again in a harmonized condition.
Below 20% charge state
ISEE Charge effect reduced to
below optimum
use the ISEE Charge to bring
device to 100% charge state
At 20% to 100% charge state
optimum ISEE Charge
Harmonization
Harmonize
up
to
five
devices
in
one
session
of
charging, then share with friends and family
You
can
charge
up
to
5
devices
simultaneously,
from
any
charge
state.
Once at 100% charge, your device(s) is/are ready to use.
Each
charging
cable
should
be
within
5
centimetres
of
the
base
and
you
can
then
easily
use
it
to
charge
another
set
of
up
to
5
devices
when
finished, and so on.
And
due
to
its
nature,
it
is
easy
to
share
its
capabilities
with
your
family
and
friends
as,
unlike
other
approaches
to
harmonization,
each
device
does
not
need
their
own,
specifically
applied
unit,
to
work,
extending
its
versatility to be very user friendly wherever you are.
Small and Light Enough to Carry anywhere
ISEE
Charge
has
a
very
small
and
compact
design,
that
is
extremely
lightweight.
This
allows
it
to
be
very
easy
to
travel
with
or
simply
carry
with
you
while
going
about
your day.
ISEE Charge Dimensions:
75mm, approximately 3 inches (width)
75mm, approximately 3 inches (length)
55mm, approximately 2.25 inches (height)
Price: 186 USD
Prefer to pay in installments?
TERMS AND CONDITIONS | PRIVACY POLICY | RETURN POLICY | CONTACT US
ISEE Infynergy (ISEE Innovations LLC)
Address: PO Box 1019, 3905 Tampa Rd, Oldsmar, Florida, 34677-3125, USA
Contact Us
Disclaimer:
All of the work, information, techniques, ideas, concepts, solutions and products presented here in this entire website, and in all ISEE infynergy (ISEE Innovations LLC) literature, are expressly the views and perspectives of ISEE infynergy (ISEE Innovations LLC) only. They are not, and have not been,
endorsed, evaluated, recognised or understood by any mainstream academic or medical body or institution and should only ever be taken as the view and philosophy of ISEE infynergy (ISEE Innovations LLC). None of what is presented here, including the innovations of ISEE infynergy (ISEE
Innovations LLC), are intended to diagnose, treat or cure any disease and an appropriate medical consultant should be used for such. Aspects relating to experiences with them are purely personal testimonials for helpfulness and not intended as a claim of performance verification.
All of the ISEE infynergy (ISEE Innovations LLC) innovations are continually evolving. As such, ISEE infynergy (ISEE Innovations LLC) may make changes in the design, appearence and function of the systems without any prior notice.
Please note: The ISEE Charge stores and operates its effect from the battery of your device(s). Most devices, when plugged into a household outlet will bypass the battery of the device.
And so when using your device(s) from mains power, you will need the ISEE Serenity to provide harmonisation.
The ISEE Charge is designed for device harmonisation while using your device(s) away from mains power and from its battery.
Use ISEE Charge anywhere while harmonising
up to Five Devices Simultaneously…
Very
few
people
on
this
planet
go
through
their
day
without
using
a
device,
be
that
a
phone,
a
laptop
or
another
battery
operated
technology.
Such
devices
are
now
such
a
prolific
part
of
peoples
lives
that
most
might consider a day without using them difficult.
We
believe
it
is
important
to
be
able
to
use
such
technologies in a harmonised state.
The
ISEE
Charge
was
designed
and
developed
to
do
just
that,
in
a
way
that
allows
you
to
use
such
technologies
without
having
to
attach
or
apply
anything
directly
to,
or
on,
your
devices.
This
method,
while
also
allowing
huge
versatility
and
multiple
device
charging,
additionally
prevents
loss
of
function,
such
as
accidentally
dropping
the
device,
which
may
result
in
an
external
solution’s
permanent
damage.
This
ISEE
Charge
applies
this
function
to
a
wide
array
of
devices
that
are
battery
operated,
including,
but
not limited to:
Mobile Phones
Laptops
Kindles
Tablets
Wireless Headsets
Chargeable Bluetooth Devices
A unique advancement for your device
harmonisation, without the need to apply an
external attachment to each, or any of your
devices…
This
novel
approach
applies
the
ISEE
harmonisation
function,
through
the
flow
of
electrical
current,
to
the
device battery directly, while it is recharging.
This
is
achieved
simply
by
placing
the
ISEE
Charge
next
to
the
recharging
cable,
so
that
the
edge
of
the
ISEE
charge
is
no
more
than
5
cm
(approximately
2
in)
away
from
the
cable
itself.
The
device
being
charged
should
be
in
flight
mode
,
such
as
while
overnight
charging
and not in use.
Advanced harmonization by creating the ISEE
effect in the field of your devices battery…
This
novel
and
advanced
technique
stores
the
ISEE
effect
directly
into
the
field
of
the
devices
battery
by
conditioning the flow of current used to charge it.
Not
only
does
this
negate
the
need
to
have
multiple
harmonization
devices
on
each
device
you
have,
but
allows
for
your
device
to
be
used
conveniently
without
an
external
appendage.
This
method
also
means
that
the
longevity
of
harmonization
is
maintained,
due
to
the
daily
use
of
a
phone
with
the
multitude
of
physical
impacts
and
it
can
endure.
It
is
important
to
know
that
harmonization
is
current
and
effective
and
not
dimished
by
repreated
physical
collisions,
however
mild,
which
is
a
common
ailment,
we
believe,
to
harmonization
methods
were
an
external
device
is
placed directly on the device itself.
Simply
make
sure
that
your
device
is
charged
to
between
20%
to
100%
charge
state,
to
allow
for
optimum
ISEE
Charge
effects.
Once
your
device
falls
below
20%,
just
recharge
using
the
ISEE
Charge
and
you
are
ready
to
use
your
device
again
in
a
harmonized condition.
Below 20% charge state
ISEE Charge effect
reduced to below
optimum
use the ISEE Charge to
bring device to 100%
charge state
At 20% to 100% charge
state
optimum ISEE Charge
Harmonization
Harmonise up to five devices in one session
of charging, then share with friends and
family…
You
can
charge
up
to
5
devices
simultaneously,
from
any
charge
state.
Once
at
100%
charge,
your
device(s)
is/are ready to use.
Each
charging
cable
should
be
within
5
centimetres
of
the
base
and
you
can
then
easily
use
it
to
charge
another
set
of
up
to
5
devices
when
finished,
and
so
on.
And
due
to
its
nature,
it
is
easy
to
share
its
capabilities
with
your
family
and
friends
as,
unlike
other
approaches
to
harmonisation,
each
device
does
not
need
their
own,
specifically
applied
unit,
to
work,
extending
its
versatility
to
be
very
user
friendly
wherever you are.
Small and Light Enough to Carry anywhere…
ISEE
Charge
has
a
very
small
and
compact
design,
that
is
extremely
lightweight.
This
allows
it
to
be
very
easy
to
travel
with
or
simply
carry
with
you
while
going
about your day.
ISEE Charge Dimensions:
75mm, approximately 3 inches (width)
75mm, approximately 3 inches (length)
55mm, approximately 2.25 inches (height)
TERMS AND CONDITIONS | PRIVACY POLICY | RETURN POLICY | CONTACT US
ISEE Infynergy (ISEE Innovations LLC)
Address: PO Box 1019, 3905 Tampa Rd, Oldsmar, 34677-3125, Florida, USA
Disclaimer:
All of the work, information, techniques, ideas, concepts, solutions and products presented
here in this entire website, and in all ISEE infynergy (ISEE Innovations LLC) literature, are
expressly the views and perspectives of ISEE infynergy (ISEE Innovations LLC) only. They are
not, and have not been, endorsed, evaluated, recognised or understood by any mainstream
academic or medical body or institution and should only ever be taken as the view and
philosophy of ISEE infynergy (ISEE Innovations LLC). None of what is presented here, including
the innovations of ISEE infynergy (ISEE Innovations LLC), are intended to diagnose, treat or
cure any disease and an appropriate medical consultant should be used for such. Aspects
relating to experiences with them are purely personal testimonials for helpfulness and not
intended as a claim of performance verification.
All of the ISEE infynergy (ISEE Innovations LLC) innovations are continually evolving. As such,
ISEE infynergy (ISEE Innovations LLC) may make changes in the design, appearence and
function of the systems without any prior notice.
Price: 186 USD
Prefer to pay in installments?
Menu
Please note: The ISEE Charge stores and operates its
effect from the battery of your device(s). Most
devices, when plugged into a household outlet will
bypass the battery of the device. And so when using
your device(s) from mains power, you will need the
ISEE Serenity to provide harmonisation.
The ISEE Charge is designed for device harmonisation
while using your device(s) away from mains power
and from its battery.
You
can
use
ISEE
Charge
anywhere
and
share
with
friends,
while
Harmonizing up to five devices simultaneously…
Very
few
people
on
this
planet
go
through
their
day
without
using
a
device,
be
that
a
phone,
a
laptop
or
another
battery
operated
technology.
Such
devices
are
now
such
a
prolific
part
of
peoples
lives that most might consider a day without using them difficult.
We believe it is important to be able to use such technologies in a harmonized state.
The
ISEE
Charge
was
designed
and
developed
to
do
just
that,
in
a
way
that
allows
you
to
use
such
technologies
without
having
to
attach
or
apply
anything
directly
to,
or
on,
your
devices.
This
method,
while
also
allowing
huge
versatility
and
multiple
device
charging,
additionally
prevents
loss
of
function,
such
as
accidentally
dropping
the
device,
which
may
result
in
an
external
solution’s
permanent damage.
This
ISEE
Charge
applies
this
function
to
a
wide
array
of
devices
that
are
battery
operated,
including,
but not limited to:
A
unique
advancement
for
your
device
harmonization,
without
the
need
to
apply
an
external
attachment
to
each,
or any of your devices.
This
novel
approach
applies
the
ISEE
harmonisation
function,
through
the
flow
of
electrical
current,
to
the
device
battery
directly, while it is recharging.
This
is
achieved
simply
by
placing
the
ISEE
Charge
next
to
the
recharging
cable,
so
that
the
edge
of
the
ISEE
charge
is
no
more
than
5
cm
(approximately
2
in)
away
from
the
cable
itself.
The
device
being
charged
should
be
in
flight
mode
,
such
as
while
overnight
charging
and not in use.
Advanced harmonization by creating the ISEE
effect in the field of your devices battery
This
novel
and
advanced
technique
stores
the
ISEE
effect
directly
into
the
field
of
the
devices
battery
by
conditioning
the
flow
of
current
used
to charge it.
Not
only
does
this
negate
the
need
to
have
multiple
harmonization
devices
on
each
device
you
have,
but
allows
for
your
device
to
be
used
conveniently
without
an
external
appendage.
This
method
also
means
that
the
longevity
of
harmonization
is
maintained,
due
to
the
daily
use
of
a
phone
with
the
multitude
of
physical
impacts
and
it
can
endure.
It
is
important
to
know
that
harmonization
is
current
and
effective
and
not
dimished
by
repreated
physical
collisions,
however
mild,
which
is
a
common
ailment,
we
believe,
to
harmonization
methods
were
an
external device is placed directly on the device itself.
Simply
make
sure
that
your
device
is
charged
to
between
20%
to
100%
charge
state,
to
allow
for
optimum
ISEE
Charge
effects.
Once
your
device
falls
below
20%,
just
recharge
using
the
ISEE
Charge
and
you
are
ready to use your device again in a harmonized condition.
Below 20% charge
state
ISEE Charge effect
reduced to below
optimum
use the ISEE Charge
to bring device to
100% charge state
At 20% to 100%
charge state
optimum ISEE
Charge
Harmonization
Harmonize
up
to
five
devices
in
one
session
of
charging,
then
share with friends and family
You
can
charge
up
to
5
devices
simultaneously,
from
any
charge
state.
Once
at
100%
charge,
your device(s) is/are ready to use.
Each
charging
cable
should
be
within
5
centimetres
of
the
base
and
you
can
then
easily
use
it
to
charge
another
set
of
up
to
5
devices
when finished, and so on.
And
due
to
its
nature,
it
is
easy
to
share
its
capabilities
with
your
family
and
friends
as,
unlike
other
approaches
to
harmonization,
each
device
does
not
need
their
own,
specifically
applied
unit,
to
work,
extending
its
versatility
to
be
very
user
friendly wherever you are.
Small
and
Light
Enough
to
Carry
anywhere
ISEE
Charge
has
a
very
small
and
compact
design,
that
is
extremely
lightweight.
This
allows
it
to
be
very
easy
to
travel
with
or
simply
carry
with
you
while
going
about
your
day.
ISEE Charge Dimensions:
75mm, approximately 3 inches (width)
75mm, approximately 3 inches (length)
55mm, approximately 2.25 inches (height)
TERMS AND CONDITIONS | PRIVACY POLICY | RETURN POLICY | CONTACT US
ISEE Infynergy (ISEE Innovations LLC)
Address: PO Box 1019, 3905 Tampa Rd, Oldsmar, Florida, 34677-3125, USA
Contact Us
Disclaimer:
All of the work, information, techniques, ideas, concepts, solutions and products presented here in this entire website, and in all ISEE infynergy (ISEE Innovations LLC) literature, are expressly the views and perspectives of
ISEE infynergy (ISEE Innovations LLC) only. They are not, and have not been, endorsed, evaluated, recognised or understood by any mainstream academic or medical body or institution and should only ever be taken as the
view and philosophy of ISEE infynergy (ISEE Innovations LLC). None of what is presented here, including the innovations of ISEE infynergy (ISEE Innovations LLC), are intended to diagnose, treat or cure any disease and an
appropriate medical consultant should be used for such. Aspects relating to experiences with them are purely personal testimonials for helpfulness and not intended as a claim of performance verification.
All of the ISEE infynergy (ISEE Innovations LLC) innovations are continually evolving. As such, ISEE infynergy (ISEE Innovations LLC) may make changes in the design, appearence and function of the systems without any
prior notice.
Price: 186 USD
Prefer to pay in installments?
Please note: The ISEE Charge stores and operates its effect from the battery of your device(s). Most devices, when
plugged into a household outlet will bypass the battery of the device. And so when using your device(s) from mains
power, you will need the ISEE Serenity to provide harmonisation.
The ISEE Charge is designed for device harmonisation while using your device(s) away from mains power and from its
battery.